Atlona AT-HD88M-SR Spezifikationen PDF herunterladen (Seite 13)

+ &!!&

' %& * 



AT-HD88M-S as master unit

1. Connect all sources to HDMI Inputs on the 8x8 HDMI over CAT5 matrix master AT-HD88M-S

2. Connect each CHANNEL CONTROL output port on the AT-HD88M-S to respective CHANNEL

CONTROL port on the remote receiver AT-HD88M-R

3. Connect each A/V SIGNAL output port on the AT-HD88M-S to respective A/V SIGNAL input on the

remote receiver AT-HD88M-R

4. Connect IR blaster to the IR MAIN jack of AT-HD88M-S and direct the IR blaster to the built-in IR

receiver of the sources

5. Connect the UL AC C13 power cord to the AT-HD88M-S

6. Power on all HDMI sources

7. Power on the AT-HD88M-S



AT-HD88M-R as receiver unit

1. Connect each HDMI output to HDMI displays

2. Connect the A/V SIGNAL port on the AT-HD88M-R to the A/V SIGNAL port on the AT-HD88M-S

3. Connect the CHANNEL CONTROL port on the AT-HD88M-R to the CHANNEL CONTROL port on the

AT-HD88M-S

4. Connect IR receiver and place the IR receiver at the appropriate position that can receive the IR

command signals sent from the users

5. Dial the 8-level rotary control switch to adjust the HDMI signal level until the picture and sound are

clear

Performance rating

Type of LAN cable

Wiring Shielding CAT5 CAT5e CAT6

Solid

Unshielded (UTP)



 

Shielded (STP)



 

Stranded

Unshielded (UTP)



 

Shielded (STP)





Termination Please use EIA/TIA-568-B termination (T568B) at any time

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Keine Kommentare

Atlona AT-HD88M-SR Spezifikationen Seite 13